Marine Audio MA110, Operation Manual

Page: 8 / 14

MA110
6
System Settings
Press VOL/ENTER knob button (4) to enter the system settings. Rotate the
VOL/ENTER button (4) to navigate through the following menu setting items:
Bluetooth, Illumination, Contrast, Low Voltage Alert, Tuning Region, System Info,
System Reset and Audio Settings. Press the
VOL/ENTER buttons (4) to select the
item. The unit will automatically exit the Audio Settings after seven seconds of
inactivity.
The following System Setting items can be adjusted.
BLUETOOTH
Pair Device: Press the Enter button to pair a device.
Paired Device: View, lock and delete from a list of previously paired mobile device
models.
ILLUMINATION
Press the VOL/ENTER encoder button (4) to cycle through DAY, NIGHT or AUTO
mode.
Day Mode
Display: Adjust the display brightness.
Buttons: Adjust the buttons brightness.
Press
VOL/ENTER knob button (4) to active the brightness control, then rotate
VOL/ENTER knob (4) clockwise or counter-clockwise to adjust desire brightness
from level “1” to “10” for day mode.
Night Mode
Display: Adjust the display brightness.
Buttons: Adjust the buttons brightness.
Press VOL/ENTER knob button (4) to active the brightness control, then rotate
VOL/ENTER knob (4) clockwise or counter-clockwise to adjust desire brightness
from level “1” to “10” for night mode.
Auto Mode
Automatically switches illumination from Day mode to Night mode when illumination
trigger lead is ene12VDC.
CONTRAST
Rotate the VOL/ENTER knob (4) clockwise or counter-clockwise to adjust desire
display contrast.
LOW VOLTAGE ALERT
Press VOL/ENTER knob button (4) to turn the low voltage alert on or off. When low
voltage alert turn on, it will monitor input voltage on ACC line. When the battery
voltage is low (drops below 10.5V (+/-0.3V), the audible beep tone will sound
interval from speaker and the display will flash LOW VOLTAGE on the bottom of the
display.
TUNING REGION
Rotate the VOL/ENTER knob (4) to select the tuner region frequency step: North
America or Europe, press VOL/ENTER button (4) to confirm selection.
SYSTEM INFO
Press the VOL/ENTER button (4) to view software version information.
SYSTEM RESET
Press the VOL/ENTER button (4) to enter system reset menu. Rotate the
VOL/ENTER knob (4) to select “Confirm” and press VOL/ENTER button (4) to
confirm factory default restore. This function will time out after 5 seconds of
inactivity and the unit will resume normal operation. After reset, the unit will default
to FM mode.
AUDIO SETTINGS
Press VOL/ENTER button (4) to enter Audio Settings menu.
Back Key
Press button (3) to return previous settings menu.
Auxiliar y Input
Connect the portable audio device to the AUX IN cable routed from the rear of the
radio. Press the button (1) to enter the source menu. Then rotate the
VOL/ENTER knob (4) to select Auxiliary mode and press VOL/ENTER button (4) to
enter Auxiliary playback mode.