8
5.4. Extender
The pictures on the
right show the slot
bracket and the
MARC Extender's
board.
Using the Wordclock
input you can
implement the bond
consisting of MARC 4
DIGI and MARC
Extender in a
Wordclock
environment. If the
extender is connected
at the end of the
Wordclock bus, the
Wordclock input of the extender will have to be terminated. This is
ensured by setting the jumper on the pins 2 to 3 of the jumper block. If
a termination of the Wordclock is not required, you will have to set the
jumper on the pins 1 to 2 of the jumper block.
For details concerning the synchronisation settings, please refer to
chapter 6.4.1.
For the connection of external digital devices with electrical S/PDIF
inputs and outputs you can use commercially available RCA cables.
For the connection of external digital devices with AES/EBU inputs and
outputs you will have to plug the supplied break-out cable on the 9-pin
SUB-D connector. This one will provide you with an XLR socket and an
XLR plug, which you use for connecting your AES/EBU device.
