Level Switch for Analog Outputs
Using this switch you can set the output level of the analog
outputs between –10 dBV and +4 dBu. For more information
about the suitable level for the device to be connected, please
refer to the appropriate manual.
ADAT Output
The connection of a device to the ADAT output is performed
using an optical cable with TOSLINK plug.
Power Supply
Please insert the cable of the supplied mains plug in order to
provide the ADCON with voltage.
3. Operation
3.1. Rack
Installation
The ADCON requires 1 RU for the 19” rack installation. Please note
that 15 cm will have to remain for reverse ports.
Please ensure sufficient air supply and avoid external thermal
influences in order to protect the ACDON from overheat.
The ADCON has a size of only 9.5”, therefore you will require an
appropriate fitting kid for the installation when using the entire width of
the rack. The fitting kid is available in specialized stores. For questions
please contact our support.
3.2. Power
Supply
Please connect the ADCON to the plug described as element [7] in
section 2.2. using the provided power supply to a mains plug (230 V).
6
