-9-
Cleaning and
Maintenance
iMpoRtant:
your Blending Jar, Shaving and Blending Blades are subject to wear
during normal use. Always inspect for nicks, chips, or cracks. Always inspect for
broken, cracked, or loose blades. If the jar or Shaving and Blending Blades are
damaged, do not use. Call our toll-free customer service number, 1-877-689-2737,
to obtain replacement parts.
1.
Make sure unit is unplugged. place on a clean dry surface.
turn the unit so the back is facing you. push down on the
Ice Reservoir Release Button
. lift the back of the
Ice Reservoir
and remove. this will expose the
Shaving Paddle and
Ice hopper
.
Note the location of the
Shaving blade
inside the
ice hopper.
WaRning: Do not place fingeRS inSiDe the
ice hoppeR neaR the Shaving blaDe.
blaDe iS ShaRp hanDle caRefully.
2.
To Remove the Shaving Paddle:
press the button located behind the
Ice Chute
.
if the button cannot be pressed, rotate the
Shaving Paddle
for a half turn and retry.
while pressing the button, rotate the Shaving Paddle
counter-clockwise
(to the left) by placing fingers in the
ridges of the
Shaving Paddle
and unscrew.
this will expose the
Ice hopper and Shaving Blade
.
to re-assemble the
Shaving Paddle
,
simply replace it into the threaded insert and
rotate clockwise. hand tighten only.
Shaving blaDe
Summary of Contents for DM1500 Series
Page 15: ...NOTES...
