DSM410
User’s Manual
Page 50
Revision 1.7.2
6.1 Airmar Depth/Speed/Temperature Transducers
The DSM410 supports configuration and calibration of the following Airmar
Depth/Speed/Temperature transducers that have NMEA 2000
®
interfaces:
DST800
DT800
P39
P79
B122
ST850
ST800
HT200
The following calibration functions are supported (not all functions apply to every model of
transducer):
Reset trip log
Set depth Offset
Perform Speed Calibration
Program Temperature Offset
Figure 30
– Airmar Depth/Speed/Temperature Transducer Configuration Screen
6.1.1 Advanced Configuration
Advanced Configuration changes some complex parameters within the device, and should only be
performed by an advanced user. Typically advanced configuration is only done at installation and
should not need to be done while at sea.
