Revision 1.7.2
Page 253
The desired option is selected using the
Scroll Up
and
Scroll Down
buttons, and then pressing the
Enter
button again. The tone of the Annunciator will be the same as that set in 8.3.9.
8.3.11
SMS (Text) Settings…
For each alert, you may select up to three phone numbers from the phone book to send an alert
message to. For each phone number, you may choose to send a message when the alert is
triggered, when the alert is cleared, or both when the alert is triggered and when the alert is cleared.
After you select this entry and press “Enter” the screen changes to show the “SMS (Text) Settings…”
screen as shown in Figure 297 below.
Figure 297
– SMS (Text) Settings... Screen
Use the “Scroll Up” and “Scroll Down” keys to highlight the desired entry, and press “Enter” to edit it.
The screen will change to the “SMS (Text) Phone Number #x” screens shown in Figure 298 below.
Figure 298
– SMS (Text) Phone Number #x Screen
This contains the following fields:
