11
Mareli Systems
P3 CLICK (3 sec)
Pellet Loading Correction
P4 CLICK (3 sec)
Combustion Fan Correction
The access to the menu is done by pressing
P2
and
P4
at the same time.
MODALITY
LED
Gior
:
Daily Program , 3 programs for each day of the week;
W
G
S
SEtt
:
Weekly Program , 3 programs for all days of the week;
W
G
S
FiSE
:
Week-End Program , 3 programs for Mon-Fri and Sat-Sun;
W
G
S
OFF
:
Programs Disabled;
W
G
S
The long pressure of
P3
button activates this function (You have to do it two
times to access the modify modality). The bottom display shows
PELL
, the
upper display the value. With buttons
P3/P4
the value is increased or
decreased; the default set is ‘0’. After 5 seconds the new value is saved and
the display shows as normal.
The long pressure of
P4
button activates this function (You have to do it two
times to access the modify modality). The bottom display shows
UEnt
, the
upper display the value. With buttons
P3/P4
the value is increased or
decreased; the default set is ‘0’. After 5 seconds the new value is saved and the
display shows as normal.
Heating Power (
Air
)
This menu allows to change the heating power:
• Power manually set from 1 to 5.
• Heating Power set automatic by the system.
Chrono Enable Menu
This menu allows to select the chrono modality. On display appears the label
ModE
.
MENU FOR PROGRAMMING TIME RANGES
On display appears the label
ProG
.
It has 3 submenus, one for each program modality:
Daily
: it allows to set 3 programs for each day of the week
M o
;
Weekly
: it allows to set 3 programs for all days of the week
M S
;
Week-End
: it allows to set 3 programs for Mon-Fri and 3 programs for Sat-Sun
M F - S S
;
Instructions
- For each program, it is necessary to set the time on and the time off.
1) Scroll with the buttons
P3/P4
until the wished Submenu and push the button
P3
(
G i o r n
);
2) Push the buttons
P3/P4
to select one of the 3 available programs;
3) Push the button
P1
for 3 seconds;
4) Select the ignition time;
5) Push the button
P2
to enter in modify mode: the selected value (hours or minutes) blinks. Push the button
P3
to switch between hours and minutes,
P3/P4
to modify the value;
6) Push the button
P2
to save;
7) Select with the button
P3
the Off Timer and repeat the procedure from point 5;
For each time is possible to modify minutes with intervals of 15 minutes (e.g.: 20:00, 20:15, 20:30, 20:45).
Only for 11 p.m. is possible to increase minutes from 45 to 59, in order to get an ignition around midnight.
USER MENU 2
