background image

2

Mareli Systems

Observing the prescriptions of the present manual is in the user’s favour and is one of 

the warranty conditions. Compliance with this instruction is in the interest of the con-

sumer and one of the warranty terms.

•  This appliance is not intended for use by people (including children) with limited physical, senso-

ry or mental abilities or lack of experience and knowledge. The installation must be performed by 

a qualified expert in the field of heating installations or authorized by “Marelli Systems’ service. The 

place and way of connecting the stove should be selected carefully in accord with the safety instruc-

tions. Install away from flammable objects!

•  Before starting any operation, the user must read and fully understand the contents of this in-

struction manual. Incorrect setup may cause hazardous conditions and / or incorrect function of 

the stove;

•  Do not wash the stove with water. Water can get inside the fireplace and damage the electronics 

and cause an electric shock;

•  Do not put clothes to dry on the stove. Any clothes hangers and other objects must be located 

within a reasonable distance from the fireplace. Fire hazard;

•  The user is fully responsible for the proper use of the product which exempts the company from 

liability of any users errors or misbehaviour or omissions;

•  Any intervention or replacement that is made by unauthorized people or using non original spare 

parts for the product can be risky for the user and release the company from all liability;

•  Most surfaces of the stove are extremely hot (the door handle, glass, flue pipe, etc.). Avoid contact 

with these parts before assuring yourself that you us temperature resistant gloves as well as suitable 

temperature resistant instruments;

•  Under no circumstances should the fire be ignited with the door open or broken glass;

•  The product must be electrically connected to a system equipped with an effective earth conduc-

tor. (Must be grounded);

•  Turn off the stove in case of failure or malfunction;

•  All unburned pellets in the burner after each unsuccessful attempt ignition must be removed 

before a new ignition;

•  When installing the product all fire safety requirements must be respected

If there is a fire in the flue pipe, extinguish the stove, disconnect the power cord and never open the 

door. Call competent authorized service technicians;

•  Do not light the stove with flammable materials if the ignition system failed;

•  Periodically check and clean the smoke outlet ducts of the stove (connection to the flue pipe);

•  Pellet stove is not a cooker;

•  Always keep the cover closed;

SAFE DISTANCES:

When installing the product a safe distance of at least 600 mm must be respected. This 

distance applies to the product located near materials of B or C flammability level. The 

safe distance is doubled if the product is close to materials of C3 combustion level.

INSTRUCTIONS FOR SECURITY:

Summary of Contents for ONYX AIR 8 KW





















Reviews: