5
surface. This can be measured by holding a metal strip on the front and
rear roller and measure the distance between the strip and brushes.
12. When the Maredo GT190 Fraze-Groomer
heads are fitted with connection to Jacobsen,
John Deere, Baroness or Toro 3400 Triflex series,
the Maredo collecting box is attached to the GT190
with the standard Maredo connection. The heads
of the Allen bolts in the collecting box fit exactly
in the GT190
’s support
brackets.
For Toro 30**, 31** and 32** series
greensmowers a different connection is used.
Two support plates will be added, left and right,
to the collecting box. With these support plates
the Maredo
collecting box will fit directly on Toro’s
sub-suspension frame.
13. The GT190 Fraze-Groomer works
different compared to any other
verticutter or groomer. Thanks to the
integrated gearbox, the rotation direction of
the blades will be reversed. This means that
the blades of the GT190 rotate against
driving direction. This rotation direction helps
the blades to `lift-
out‘ the material instead
of dragging it through the slit.
Another unique feature of the GT190 is that
the cutting blades are mounted on a slight angle on the main shaft. The
result is that each tip of a blade creates a short slit. As a result, there will
be no visible lines or damage in a green after a treatment with the GT190.
6.0
Maintenance
-Check nuts and bolts regularly
- Regularly clean the GT190 Fraze-Groomer
heads.
Never use high pressure, or hot
water cleaners to clean the GT190
.
Clean (carefully) with compressed air.
-Every GT190 head has one grease nipple
located on top of the side gearbox.
Grease this nipple with 2 shots of EP02 grease every 50 hours.
