Do not disturb mode:
If this function is activated, the smart watch will not receive
notifications and its screen will not turn on when you lift your wrist between 22:00
and 08:00.
Raise wrist to turn on screen:
If this function is activated, the smart watch screen
will turn on when you lift your wrist and the smart watch is in standby mode.
Automatic heart rate monitoring:
If this function is activated, when you wear the
smart watch on your wrist, takes an automatic heart rate measurement every 5
minutes.
Automatic blood oxigen monitoring:
If this function is activated, when you wear the
smart watch on your wrist, takes an automatic blood oxigen measurement every 5
minutes.
Camera remote control:
Click on "Take a photo". The camera icon will appear on
your smart watch, shake the smart watch and the phone will take a photo. The
photo will be saved in the phone gallery. On some phones, you may need to open
the camera on your phone first in order to use this function.
Note: When the camera usage request appears, select “Allow”.
Find smart watch:
Click on this function and the watch will vibrate. The phone and
the watch have to be linked and within the Bluetooth range.
Firmware update:
If there is a new version of the smart watch firmware, it will
update to the latest version.
Firmware version:
Displays the current firmware version of the smart watch.
Reset:
Click to restore factory settings on the smart watch. This function will erase all
the data saved on the smart watch.
Unlink:
Click to unpair the smart watch from the paired mobile phone.
