arrives, the bracelet will prompt: the alarm icon and time, and vibrate for 20 times;
2.11 Reminder mode
a. Wake up screen: Any reminders other than alarm clock, sedentary and drinking
reminder will only be prompted with bright screen at bracelet end;
b. Vibrate: Any reminders other than alarm clock, sedentary and drinking reminder
will only be prompted with vibration at bracelet end;
c. Wake up vibrate: for any reminder, the bracelet end only displays bright
vibrates;
2.12 Heart rate detection
Set the period from start to end and sedentary time interval (minutes), check the heart
rate test and save.
2.13 Firmware upgrade
Detect whether the firmware version of the bracelet is the latest one. Prompt to update
and upgrade to the latest version when there is a new one.
2.14 Unbind
After the bracelet is bound to app, click the connected device name or swipe left to
unbind in More interface. Ignore the paired device in the iPhone settings.
●FAQ
*Do not expose this device to overcooling or overheated conditions for a long time,
otherwise it will cause permanent damage.
*Why can’t wear watch when taking a hot bath?
As bath water temperature is high, it will generate mass steam which is in gaseous
phase and characterized by small molecule radius. It is easy to penetrate through
watch housing gap. When temperature lowers, it will become liquid phase water drop,
which is easy to cause short circuit in the watch, resulting in damaged circuit board
and watch.
*The watch can’t start up or charge
If your newly received watch can’t start up, it maybe because battery is under
protection due to collision during watch transportation. Plug in charging cable to
activate the watch.
If your watch can’t start up due to too low battery or the watch has not been used for a
long time, please plug in USB cable and charge for half an hour for activation.
