©IMPEX INC.
www.marcypro.com
9
CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
4. Examine the equipment regularly for signs of damage or wear.
5. Replace any defective components immediately and/or keep the equipment out of use until
repair.
6.
Failure to examine regularly may affect the safety level of the equipment.
OPERATION NOTES
This equipment should be placed on flat surface. The incline or decline of surface should
be limited to 3% or less for best performance and safety.
Bench Backrest Adjustment Angles
Backrest adjustment angle ranges from -27
0
to 76
0
.
Seat pad adjustment angle ranges from 0
0
to 16
0
