www.puretecfitness.com
8
computer function
KEY GUIDE
MODE: To select functions of time, speed, distance, calories and pulse. Hold this button for 2
seconds to go to the beginning.
HOW TO INSTALL BATTERIES
Remove battery cover on the back of monitor.
1. Place 2 AAA batteries into the battery housing ensuring they are installed correctly and replace
the cover.
2. If the display is illegible or only partial segments appear, please remove the batteries and wait
for 15 seconds before installing new batteries. Old batteries should be disposed or correctly in
line with Local Regulations.
3. Removing the batteries will erase monitor display.
FUNCTIONS AND OPERATIONS
AUTO ON /OFF: The monitor will start up automatically if the exercise machine is in motion. If you
stop exercising over 4 minutes, monitor will turn off automatically.
SCAN: Press “mode” key to select “scan” mode w/a “scan” sign on the upper left corner
of the Monitor. Then this function will automatically scan through all the functions
and display each value in turn in the LCD display.
TIME: Automatically accumulate workout time when starting exercise.
SPEED: Display current speed during workout time
DISTANCE: Displays distance covered during workout.
CALORIES: Displays calories burned during workout.
PULSE: Automatically detects and displays your current heart rate when exercising, press
the button until the arrow points to PULSE. The monitor will display your current
pulse rate per minute. To measure your pulse, place the pains of your hands on
both of the contact pads and the monitor will show your current pulse per minute
(BPM) in the LCD display. Note: the pulse sensor should be used as a workout
guide only and is not a medical device.
