©IMPEX INC.
www.marcypro.com
14
Error Message:
E1 (ERROR 1):
Normal state
: During workout, when the monitor did not get the count signal from the gear motor more than 4 seconds and
check under successive 3 times then the LCD will show E1.
Power on state
: The gear motor will return to zero automatically, when the signal of motor cannot be detected for more than
4 seconds then the gear motor’s driver will be cut off immediately and show the E1 on the LCD display. All
the other digital and function mark are blank, and the output signals are cut off also.
E2 (ERROR 2): When the monitor read the memory data, if the I.D. code is not correct or the memory IC damages then the
monitor will show E2 immediately at power on.
E3 (ERROR 3): After 4 seconds by start mode, the computer detects the faulty motor did not leave the zero point then the LCD
bar displays “E3”.
LCD Workout Graphics
PRESET PROGRAM PROFILES:
PROGRAM 1
PROGRAM 2
PROGRAM 3
MANUAL
STEPS
HILL
PROGRAM 4
PROGRAM 5
PROGRAM 6
ROLLING
VALLEY
FAT BURN
PROGRAM 7
PROGRAM 8
PROGRAM 9
RAMP
MOUNTAIN
INTERVALS
PROGRAM 10
PROGRAM 11
PROGRAM 12
RANDOM
PLATEAU
FARTLEK
PROGRAM 13
PRECIPICE
USER SETTING PROGRAM
PROGRAM 14
USER 1
