8
STEP 3
(a) Insert plastic spacer (25) and left lower handlebar (5) on the front post (4), tighten with
one hex bolt (26), one D shape washer (19) and one washer (27), then place plastic nut
cap (28) on to hex bolt (26). Repeat this procedure for the right lower handlebar (6).
(b) Put pedal hinge bolt (23L) through two wave washer (36) and the left pedal arm (7) then
attach it to the left crank (42) tighten with one set of flat washer (33) and nylon lock nut
(24). Put left pedal (13) onto left pedal arm (7), tighten with two sets of hex bolt (20), flat
washer (22) and nylon nut (21). Repeat this procedure for the right pedal (14).
Note; the
pedal hinge bolts left & right are marked L & R respectfully. The left hand hinge
bolt uses a Left Hand Thread.
STEP 4
Remove the hand pulse wire (41) from the “U” type hand pulse handlebar (11),
fix the “U”
type hand pulse handlebar (11) to the front post (4), tighten with two sets of allen bolt (31)
and flat washer (32), then plug the sensor cable (41) into the rear of the computer marked
“pulse input”.
23L
23R
