15
COMPUTER INSTRUCTIONS
UT8325-7
FUNCTION
SCAN
Scans through each function’s values every 6
seconds.
TIME
0:00~99:59 Minutes and Seconds
SPEED
0.0~99.9 km/h
DISTANCE 0.00~99.99 km
CALORIES 0.0~9999 CAL
PULSE
30~ 240 BPM
OPERATION STEP
SCAN:
Press MODE button until SCAN appears on the
screen; the computer automatically scan through each function value every six
seconds on the display.
TIME:
Press MODE button until TIME value appear on the LCD; the computer will display
your actually workout time.
SPEED:
Press MODE button until SPD appears on the LCD; the computer display the current
training speed.
DISTANCE: Press MODE button until DST appears on the LCD; the computer display the
accumulative distance travelled during your workout.
CALORIES: Press MODE button until CAL appears on the LCD; the computer will display the total
accumulated calories burned during workout.
PULSE:
Press MODE button until PULSE or heart symbol appears on the LCD; the computer
will display your current heart rate values with a flash heart symbol
KEY Function
RESET: Pressing the MODE button for over 2 seconds, will reset all the functional values to
zero.
AUTO ON/OFF: When you start to exercise or press the MODE button, the computer will turn on.
If the computer receives no input signal for 4 minutes, the power will turn off
automatically.
Hand Pulse Sensors
This cycle comes with hand pulse sensors which can be found on the handlebars. To operate,
place your palms on the sensors. It will take a few seconds for your heart rate to be displayed.
The pulse reading is not an accurate reading and is intended only as a guide and should not be
