background image

Versa Electronics

www.MarCumtech.com

- 9 -

Removing the camera cable storage reel

Start by removing all of the camera cable from the cable storage reel. Once    

the Cable has been removed, the cable reel can slide out by gentle lifting 

on

 

the reel (on the opposite side of the charging/AV port), while 

simultaneously sliding in that direction. Once the Cable storage reel is 

removed, re-wind the excess cable back onto the reel. To replace the reel 

onto the , align the tabs furthest from the USB port with the 

indented area on the underside of the reel and slide toward the USB Port.

SYSTEM MAINTENANCE

The camera system is manufactured to perform in a wide 

variety of environmental conditions. It is recommended when not in use to 

store the indoors or in a climate controlled environment. Take 

care to avoid leaving your system in the cold, even when heading to the 

lake for an outing. The operates using an internal lithium 

battery, and this battery can become damaged if left in the cold. For optimal 

performance, it is recommended to start with a full charge on the battery 

and to insulate the system from the cold during periods of non-use or 

transit.

One Year Warranty

MarCum warranties this product to be free from defects in materials 

and workmanship for one year from the date of purchase. This 

warranty applies to customers who properly complete the online 

product registration form found on the MarCum Technologies 

Website: www.marcumtech.com/support.

MarCum Technologies will repair or replace any components that fail in 

normal use. Failures due to abuse, misuse, unauthorized alteration, 

modification, or repair are not covered. The warranty is valid only for the 

original owner who purchases the unit from an authorized dealer. An 

original sales receipt dated within the warranty period is required for all 

warranty claims.

To best serve our customers, MarCum Technologies has set a standardized 

battery warranty policy. Battery warranty coverage requires a proof of 

purchase. Please see our website, www.marcumtech.com/support  for full 

details on warranty coverage.

Battery Warnings

Do not immerse the battery in water or sea water. Keep the battery in a 

cool dry place when not in use. Do not use or leave the battery near a heat 

source (i.e. heater, furnace, fire). Use the battery charger only as directed 

when recharging. Do not reverse the positive and negative terminals on the 

battery connections. Do not discard the battery in a fire, furnace, or other 

combustible space. Do not connect the battery directly to an electrical 

outlet. Do not short –circuit the battery by directly connecting the positive 

and negative terminals with metal objects. Do not directly solder the battery 

or pierce the battery with a nail or other sharp objects. If the battery gives 

off an odor, generates heat, becomes discolored or in any way appears 

a

b

normal during use, or while 

r

echarging or discharging, immediately stop 

using it. If the battery leaks and the battery contents (electrolyte) gets into 

Summary of Contents for RECON5+













Reviews: