background image

Two-Year Warranty

For two years from original date of purchase, 
all required repairs resulting from manufacturing
defects on your MarCum LX-3 will be free of
charge. This does not apply to physical damage
resulting from accident or misuse. Any modification
or attempt to repair the original equipment or
accessories by unauthorized personnel will void
the warranty. During the two-year warranty period,
MarCum will repair or replace the unit at no cost to
you, covering all labor, materials, and return trans-
portation (standard ground charges only). It is the
responsibility of the owner to cover the cost of
shipping the unit to our authorized repair center.
This warranty is non-transferable and applies to
the original purchaser only. MarCum does not
extend or offer any warranty on accessories 
included in this product that are not manufactured
by MarCum (e.g. batteries).

MarCum reserves the right to make modifications
on its products without assuming the obligation to
install the changes on previously manufactured
units. MarCum will not assume liability for any 
personal injury or property damage resulting from
the use of this product.

To activate this warranty, send in the enclosed 
warranty card with proof of purchase. A copy of the
receipt verifying purchase date must accompany
warranty card within ten business days to 
activate warranty.

16

Summary of Contents for LX-3












Reviews: