Service Manual 1000584
02-02-15
Page 4 of 11
2. INSTALLATION
a. Mounting
•
Cut a Ø32mm circular cut out in the sink/counter for the font.
•
The font is then securely mounted as shown below using the washer and nut
provided.
•
The wire and water outlet tube should pass freely through the large hole
through to the underside of the counter.
•
For added stability a bead of silicone sealant can be applied to the underside of
the font around the perimeter.
3.
Tighten the wing nut up
while threading the wiring
and tube through the
mounting plate.
1.
Mount the font on
the sink. Placing the
threaded bar, hose
and wiring through
the hole.
2
. Place the mounting
plate back through the
threaded bar, hose and
wiring. Screw the wing nut
back on with the washer.
