Marco Marco 1000680, Service Manual

Page: 6 / 43

6
Service manual April 2017 Uber boiler
1.1.5 Precautions:
•
NEVER lift or lower the unit by holding the font!
–use the upper wide tile or lift from the
base.
•
The unit requires a counter thick enough to support the weight of the machine when
full, when full it could be up to 30kg in total.
•
Never overload the scale platform with a force greater than 9kg.
•
Ensure the flow control dial is in the OFF position as shown below.
•
Check the dimensions shown for the counter cutout and the upper tile. Leave
adequate clearance on your counter top and check the space below the
counter/cabinet to ensure there is enough room.
•
Cut out the counter top to be 410x195mm. This dimension includes
clearance/tolerance space for the lower part of the machine (the actual machine is
approx 405x190mm). The full dimensions are shown on the following page.
•
Hold the machine by the tile and slowly lower it down into the cutout. It is advisable to
wear thick work gloves. A second person may be needed to hold the machine at the
bottom. Be careful not to trap fingers under the tile as it is lowered.
•
The weight of the machine when filled should be enough to ensure it does not move.
If further fixing is required, silicone can be used to stick the tile to the counter.
However, it is advisable to leave the machine free to be taken out for servicing.
Off
On
The Font Dial operates
anticlockwise to begin the flow of
water.