4
www.marchetti.eu
1. REFERENCE STANDARDS
- Leg. Decree 09.04.2008 no. 81 (O.G. no. 101 dated 30.04.08) “Consolidating act on health and
safety in the workplace”.
- UNI EN 1004 (July 2005) “Mobile access and working towers) composed of prefabricated
elements. Materials, dimensions, design loads, safety and performance requirements”;
- EN 1298 (February 1996) “Mobile access towers. Regulations and guidelines for preparation
of an instructions manual”;
- Leg. Decree 06.09.2005 no. 206 (O.G. no. 235 on 08.10.05 – Ordinary Supplement no. 162)
“Consumers’ Code”.
2. DESIGNATION, CLASS, CAPACITY
OLYMPO working tower EN 1004 – 3 – 5 / 5 XXCD
manufactured in compliance with Leg. Decree 81/08 and Technical Standard UNI EN 1004;
Class of loads distributed uniformly equal to “3” (2.0 KN/m2);
- Maximum height permitted of the working surface equal to 5 metres both outside and inside
buildings. Inside is intended as without wind
- The overall load permitted for each tower is therefore 200 kg.
- The maximum number of surfaces loaded at the same time is 2.
- The sum of the loads relating to each surface must not exceed the overall value of the load
permitted for the scaffolding.