Installation
1: Plug PM48 into empty slot in PC and fasten the
mounting screw.
2: Insert power supply connector into top of PM48.
Most PC's have one or more spare connectors.
If not Y-splices are available at most computer stores.
3: Connect speaker wires to the binding posts.
Strip the insulation off the ends of the speaker wires and
insert the bare ends into the holes on the binding posts.
Make sure no loose strands of wire touch the metal bracket.
Fasten the wire by turning the plastic post.
An alternative is to use banana plugs.
4: Connect the patch cord with the 3.5mm phono plugs.
Plug one side into the PM48 and the other into the 'line-out'
connector on the soundcard.
The line-out connector is usually the green connector
5: Enjoy the music
Attaching speaker wire to binding post.
note
: there is no software to be installed
Power
Connector
Phono
Connector
Right
Loudspeaker
Left
Loudspeaker
PM48
Amplifier
3
