March Networks CD-13887, Technical Instructions

Page: 4 / 6

CD-13887 Rev. 5.0 - February 1, 2006 Installing an Alarm Option Kit Page 4
Accessing the Recorder and Connected Devices
After you connect devices and apply power to the recorder, use the March Networks software applications
to enable and configure the devices.
Depending on the recorder model, the software applications you use to access the devices vary, as outlined
in the following table:
Recorder model Software applications Use this application to...
4000 Series DVR
DVR Configuration Tool
•Enable and configure connected devices.
•Test device connections by turning devices on
and off.
DVR Viewer
•Test device connections by accessing live and
recorded media.
4000 C Series NVR
R
5
Installer Console
•Test device connections by turning devices on
and off.
R 5 Administrator Console •Enable and configure connected devices.