Marathon WW194014, Instructions Manual

Page: 5 / 24

2. SETTING THE DAY AND DATE ENGLISH
1. Unscrew the crown from position 1 to position 2 .
2. Pull the crown out of position 3 .
3. Turn the crown clockwise or counterclockwise to change the date or
counterclockwise to change the day*.
4. Pull the crown out to position 4 to adjust the time so that the date
changes at midnight and not at mid-day (12 noon).
*If your Chronograph watch has stopped, you may wind the crown clockwise
while in position 2. Turn the crown six to ten full turn to restart the movement.
Then set the time by pulling out the crown to position 4. Once the watch is
set onto one’s wrist, it will automatically self-wind by the normal motion of
the wrist.
CAUTION: Do not attempt to set day and date if the hands are positioned between 21:00
hours and 01:00 hours. Adjusting the day and date in this position will cause damage to
the day and date mechanism and void the warranty