GETTING STARTED
1. Plug in the A/C adaptor into the adaptor jack
(A9)
,
remove the battery tag from the rear compartment
(D1)
to activate the clock backup battery which is
already installed in the clock when you first
receive it.
2. When both the A/C adaptor and CR2032 battery
have been installed, the unit will automatically
switch to the external power supply.
3. The CR2032 battery will store all programmed
settings in case the A/C adapter is unplugged. If the
CR2032 battery is removed, all programmed
settings will be lost immediately when the A/C
adapter is unplugged.
NOTE: The clock will not operate without the
A/C adapter.
SETTING THE TIME
Hold the
(C3)
button for 2 seconds to
select time display in 12-hour or 24-hour format.
1. Slide
/
switch
(B2)
to
to
enter time setting mode.
2. Press or button
(C1
or
C4)
to adjust the time
setting. Press and hold the or button to speed
up the rate at which the value changes.
3. Slide
/
switch
(B2)
to
LOCK
to
confirm the current displayed settings.
NOTE: The HOUR value CANNOT be adjusted directly.
The HOUR value can only be changed through the
adjustment of the MINUTE value.
