7
8. Press TIME SET once again, the day of week “EN” will flash. Press
▲
or
▼
to select
the display language:
EN English
GE German
FR French
SP Spanish
IT Italian
9. Press TIME SET once again to store your settings or wait approximate 10 seconds to
exit SET MODE.
To use the WAVE On/Off
WAVE (atomic time) default is ON. Slide the switch to OFF to turn off the atomic time
feature if the clock is used in an area that does not observe the WWVB time signal.
To use DST On/Off (Daylight Saving Time)
DST default is ON. Slide to OFF if the clock is used in an area that does not observe the
DST.
To select the Time Zone
Slide the time zone switch at the back of the clock and the respective
time zone abbreviations will appear on the display and blink. The clock
will return to the day-of-the-week display in approximately 8 seconds.
To start WWVB signal search manually
Press and hold the WAVE /
▲
button to start a signal search.
°C /°F temperature display
The temperature display default is Fahrenheit. Press the °C/°F /
▼
button once to
switch to Celsius.
Low Battery Indicator
The low battery indicator will appear between the time digits when the batteries
are low. Replace with new batteries (alkaline batteries are recommended).
