Marantz /U1B, Service Manual

Page: 13 / 33

11
7. DVD REGION CODE SETTING PROCEDURE
The region code of MPEG (SD10.1) PWB ASSY supplied as spare parts is an initial value. Please change the region code
from initial value to your region code, when replaced the MPEG PWB ASSY (POS. NO.1003).
Connect the video cable to the unit and TV (or Monitor) and operate by using Remote controller RC001DV.
For /N1B and /N1SG (DVD Region 2)
Turn on the unit and TV. 1.
Press the 2. OPEN/CLOSE button to open the tray.
Press 3.
9
,
9
,
9
,
9
, AUDIO ( ) and
1
buttons on the remote controller in that order.
The tray will close automatically, and then the unit is set to STANDBY mode. 4.
For /U1B (DVD Region 1)
Turn on the unit and TV. 1.
Press the 2. OPEN/CLOSE button to open the tray.
Press 3.
9
,
9
,
9
,
9
, AUDIO ( ) and
2
buttons on the remote controller in that order.
The tray will close automatically, and then the unit is set to STANDBY mode. 4.
For /K1SG (DVD Region 6)
Turn on the unit and TV. 1.
Press the 2.
OPEN/CLOSE
button to open the tray.
Press 3.
9
,
9
,
9
,
9
,
AUDIO
( ) and
1
buttons on the remote controller in that order.
The tray will close automatically, and then the unit is set to STANDBY mode. 4.
DVD Region code check procedure
SERVICE MODE :
Press the POWER button to turn on the unit.
Press the OPEN/CLOSE button to open the disc tray.
Press the DISP. ( ) Button of the Remote controller.
The DVD Region code is displayed on the TV screen.
REG 1: DV4003/U1B
REG 2: DV4003/N1B, DV4003/N1SG
REG 6: DV4003/K1SG