![background image](http://html1.mh-extra.com/html/marantz/st-15s1-n1g/st-15s1-n1g_service-manual_1724934049.webp)
59
12. ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE
When replaced of the U-PRO (Microprocessor) or the Flash ROM, confirm contents of the following.
PWB
Name
Pos.
No.
Description
After
replaced
Remark
MA
IN
IC300 MB90F352PFM-G ST-15S1 FOR N
B
After replaced
A
: Mask ROM (With software). No need write-in of software to the microprocessor.
B
: Flash ROM (With software). Usually, no need write-in of software. But, when the software was updated, you should be
write-in of the new software to the microprocessor or flash ROM. Please check the software version.
C
: Empty Flash ROM (Without software). You should be write-in of the software to the microprocessor or flash ROM.
Refer to "Update procedure" or "writing procedure", when you should be write-in the software.
Summary of Contents for ST-15S1/N1G
