z
1 This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played back.
z
2 This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos or DTS is played back.
z
3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z
4 During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z
5 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (
v
p. 255)
z
6 This item cannot be set when “Dynamic EQ” is set to “On”. (
v
p. 197)
z
7 This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z
8 This item cannot be set when “MultEQ
®
XT32” in the menu is set to “Off”. (
v
p. 197)
z
9 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z
10 This can be set if the input signal does not contain an Auro-3D signal or if the input Auro-3D signal does not contain Front Height channels.
Contents
Connections
Playback
Settings
Tips
Appendix
326
Front panel
Display
Rear panel
Remote
Index
Summary of Contents for SR7009
Page 373: ......
