Marantz SR5010 Owner'S Manual Download Page 237

Page: 237 / 288

iPod cannot be played back

Symptom

Cause / Solution

Page

iPod cannot be connected.

When using iPod by connecting it to the USB port, some iPod variations are not supported.

When iPod is connected by using a USB cable other than the genuine cable, iPod may not be

recognized. Use a genuine USB cable.

－

The AirPlay icon

is not

displayed on iTunes /

iPhone / iPod touch / iPad.

This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to

the same LAN as this unit.

The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to

the latest version.

－

Audio is not output.

The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on iTunes /

iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume level.

－

The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon

on the

iTunes / iPhone / iPod touch / iPad screen and select this unit.

104

Audio is interrupted during

the AirPlay playback on

iPhone / iPod touch / iPad.

Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using

AirPlay.

－

Some external factors may be affecting the wireless connection. Modify the network environment by

taking measures such as shortening the distance from the wireless LAN access point.

－

iTunes cannot be played

back through the remote

control unit.

Enable the “Allow iTunes audio control from remote speakers” setting on iTunes. Then, you can perform

playback, pause, and skip operations through the remote control unit.

－

Contents

Connections

Playback

Settings

Tips

Appendix

237

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands