12
ENGLISH
MENUS
The receiver is equipped with a menu system. The menu is
used for the setup of the receiver. The different menu options
are related to each other in a logical way. Let’s assume you
have no center speaker connected, and therefore switched
to
. If you try to use
, a message will be
scrolled that this is not possible
(
).
The menu always works the same way. Arrows in the display
show you the possible moving directions.
1
Press MENU.
→
M
ME
EN
NU
U
, and
is displayed.
•
You can exit the menu at any time by pressing MENU.
2
Turn MENU NAVIGATOR until the desired option (or a
value) is displayed.
3
Press NEXT
to choose the displayed option (or
ENTER / OK to confirm a value).
• You can leave any option (values remain unchanged) by
pressing PREV.
Menu structure
Switches sound effects.
virtual 3D surround: 0…100 %
Adjusts the relative volume balance between the
connected speakers.
Test tone: on/off
Volume front left speaker: –50…+50
Volume front right speaker: –50…+50
Volume center speaker: –50…+50
Volume rear left speaker: –50…+50
Volume rear right speaker: –50…+50
Volume subwoofer: –50…+50
Selects the used speakers.
Subwoofer present: yes/no
Center speaker present: yes/no
Rear speakers present: yes/no
Chooses the speaker sizes of the used speakers, for
optimal sound reproduction.
indicates a speaker
which can reproduce frequencies lower than 50 Hz. If
is set to
,
can
only be set to
. If
is set to
,
can only be set to
and consequently a subwoofer must be connected.
Subwoofer present: yes/no
Left and right front speakers: small/large
Center speaker: small/large
Rear speakers: small/large
Distance between the usual listening position and the
speakers. This defines the delay time for the surround sound.
Distance to front speakers: 1…10 m (3…30 ft)
Distance to center speaker: 1…10 m (3…30 ft)
Distance to rear speakers: 1…10 m (3…30 ft)
Assigns the audio input connectors to the different source
selections chosen with INPUT SELECTOR (see “SOURCE
SELECTION” for details).
Digital coaxial input 1, COAX 1 IN
Digital coaxial input 2, COAX 2 IN
Digital optical input, OPTICAL IN
Analogue audio input SAT IN
Analogue audio input VCR IN
Analogue audio input TV IN
Analogue audio input CDR IN
Analogue audio input CD IN
Analogue audio input 6 CHANNEL IN
Setup for preset radio stations (see TUNER for
details).
Stores radio stations automatically
Stores radio stations manually
Allows to assign names to stored radio
stations
Resorts stored radio stations
Receiver menu
SR4000U(Eng) DFU 00.8.6 1:13 PM ページ12
