90
Specifications
n
Audio section
•
Power amplifier
Rated output:
Front:
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Maximum effective output power:
Front:
75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.)
Center:
75 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround:
75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.)
Output connectors:
6 – 8 Ω
•
Analog
Input sensitivity/Input impedance:
130 mV/47 kΩ
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
98 dB (IHF–A weighted, DIRECT mode)
n
Video section
•
Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
•
Color component video connector
Input/output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω
P
B
/ C
B
signal — 0.7 Vp-p, 75 Ω
P
R
/ C
R
signal — 0.7 Vp-p, 75 Ω
Frequency response:
5 Hz – 60 MHz — 0, –3 dB
n
Tuner section
[FM]
[AM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz – 108.0 MHz
522 kHz – 1611 kHz
Usable Sensitivity:
1.2 μV (12.8 dBf)
18 μV
50 dB Quieting Sensitivity:
MONO
2.0 μV (17.3 dBf)
STEREO 42 μV (34.5 dBf)
S/N (IHF-A):
MONO
72 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Total harmonic Distortion (at 1 kHz):
MONO
0.3 %
STEREO 0.7 %
n
General
Power supply:
AC 230 V, 50/60 Hz
Power consumption:
180 W
0.2 W (Standby)
3 W (CEC standby)
For purposes of improvement, specifications and design are subject to change without notice.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Inf
or
mation
