29
Stopping digital outputs
Stopping digital audio output reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
1
During stop mode, press SETUP.
2
Use
ui
to select “Digital Out”, and press ENTER.
3
Use
ui
to select “Off”, and press ENTER.
On
(Default) : Outputs the digital signal.
Off
: Digital signal is not output.
%
•
When digital output is turned off, the “DOFF” indicator lights up on the display.
•
The “Digital Out” has a memory retention function where the settings remain
stored and unchanged even when the disc is changed or the power is turned off.
Select the playback media mode
1
Press INPUT to select the playback media mode.
Disc
: Select to playback a disc.
USB
: Select to playback an iPod or USB memory device.
USB-DAC / Coaxial / Optical
:
Select to use this unit as a D/A converter.
%
•
You can also select the media mode by pressing DISC/INPUT on the main unit.
Switching the display’s brightness
The display brightness can be adjusted between four levels. Switching the
display off reduces a source of noise that affects sound quality, enabling
higher sound quality playback.
1
Press DIMMER.
%
•
When the display is turned off, the DISPLAY OFF indicator lights.
NOTE
•
During stop mode, the display information does not turn off. The information is
turned off only during playback.
