6
SETTING UP
To output analog audio signals to another
audio component
Connect the LINE OUT (RCA) jack on the PMD680 to
the analog input on the destination component.
Note
• To connect the mono PMD680 LINE OUT to a stereo input,
a Y-adaptor cable can be used.
To record from or output through a telephone
line
Connect the phone line to the TELEPHONE IN/OUT
jack as follows.
Notes
• Please be advised that connecting the PMD680 to a
telephone line is illegal in some countries.
• Telephone calls must be placed and received with the
connected phone.
Connecting Microphones
A dynamic or an externally powered condensor
microphone can be connected to the PMD680 via a 1/4"
or XLR connection.
Connect microphones as shown below.
Notes
• Take care not to connect or disconnect microphones while
recording. This may result in unwanted sounds in the
recording.
Connecting Analog
Components
The following illustrations show you how to connect
analog audio components for recording or playback.
To record from analog audio components
Connect the source component’s analog line output
jacks to the PMD680's LINE IN (RCA) jack.
Note
• To connect a stereo source to the mono PMD680 LINE IN,
a Y-adaptor cable can be used.
MIC (1/4")
MIC (XLR)
or
MIXER, TAPE DECK, etc.
MIXER, etc.
LINE OUT
LINE IN
Phone
RJ-11 splitter
Wall jack
