- 41 -
REC PAUSE
DISPLAY
LIGHT
REC
LEVEL
L
R
REC
HP/SPK VOLUME
PHONES
KEY LOCK
10
Front continued
10. KEY LOCK switch
The KEY LOCK switch
secures the PMD670 in the
state it is in during Record,
Playback or Stop.
KEY LOCK
Slide the switch to the right to turn KEY LOCK on.
Only these controls will work:
Display LIGHT button.
POWER switch - Works during Playback or Stop.
PRE REC switch.
If you try to operate a button or switch that is
locked, "HOLD" appears briefly in the display.
Example display:
L
R
-dB
over
0
2
6
12
20
40
00
-dB
INT
MIC
TRACKTIME
TRACK
DIGITAL
IN
OUT
CHARGE
DC IN 13V
I/O
11 12
CHARGE
a
b
Left side
11. CHARGE indicator
Lit when optional Ni-Cd
battery is charging.
12. CF card compartment
Pull to open to access the CF card.
OpenDoor Power Down is displayed for about
one second.
Card eject
button
CF card slot
CF card door
Card eject button
The Card eject button has two positions: click
out (a) and click in (b).
To eject a CF card:
1. If recording or in playback push STOP
.
If other operations are in progress cancel them
by pushing STOP
or wait for them to
complete.
2. Open the CF card door*.
3. Push and release the Card eject button so it is
in click out position (a).
4. Push the Card eject button from the click out
position to the click in position (b).
*Opening the CF card door turns power off. If
recording is in progress, opening the Memory card
door automatically stops recording and writes
critical track information to properly close the file
before powering off.
To insert a CF card:
1. Push and release the Card eject button so it is
in the click in position (b above).
2. Fully insert the CF
card.
3. Close the CF card
door.
Note: If the CF card door won't latch, check that
the Card eject button is in the click in position (b
above).
