5
3. SETTING THE MAC ADDRESS
Set “Mac Address” in Service mode.
1.
Press the POWER ON/OFF switch to turn on the power.
2.
If you press and hold both the STOP/CANCEL button
and DISPLAY/LOCK button for several seconds,
the unit will enter Service mode.
The following display appears.
3.
Press the Jog wheel with “Mac Add Set” displayed.
The following display appears.
4.
Set the Mac Address. Turn the Jog wheel until the target
digit is set then press the Jog wheel.
(Set each digit of the address from left to right in sequence.)
(Example) When the address is to be set to “91-15-00”
3. MAC ADDRESS
設定方法
サービスモードにある
Mac
アドレス 設定を行います。
1.
POWER ON/OFF
スイッチを押し、
PMD580
の電源を入
れます。
2.
STOP/CANCEL
ボタンと
DISPLAY/LOCK
ボタンを同時
に長押しすると、本機はサービスモードになります。
このとき、以下のように表示します。
3.
Mac Add Set
を表示させた状態で、
ジョグダイヤル
を
押します。このとき、以下のように表示します。
4.
次に、
Mac
アドレスを設定します。
ジョグダイヤル
を回
して目的の数字を設定し、
ジョグダイヤル
を押します。
(アドレス設定は、左から順に設定します。)
(例)アドレスを
91-15-00
に設定したとき
ジョグダイヤル
を時計方向に回し、下図の
“
Mac Add Set
”
を
表示させます。
Turn right the Jog wheel until “Mac Add Set” is displayed,
as shown below.
Mac アドレス(6 文字)を設定し終わったら
ジョグダイヤル
を押します。
Once all 6 digits of the Mac Address have been set,
press the Jog wheel.
Summary of Contents for PMD580
Page 36: ...57 58 ...
Page 40: ...62 EP9315 PIN BGA PINOUT ...
Page 51: ...73 uPD4721 EC11B15242AE ...
Page 52: ...74 NJU3716A BLOCK DIAGRAM SHIFT REGISTER LATCH CIRCUIT CONTROL CIRCUIT ...