©2011 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
NR1602 “Slim-line” Home Theater Receiver
Audio Section
• Power amplifier
Rated output:
Front:
50 W + 50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
50 W + 50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
50 W + 50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
• Analog
Input sensitivity/Input impedance:
130 mV/47 k
Ω
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 98 dB (IHF–A weighted, DIRECT mode)
Video Section
• Standard video connectors
Input/output level and impedance:
1 Vp-p, 75
Ω
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance:
Y (brightness) signal — 1 Vp-p,
75
Ω
PB / CB signal — 0.7 Vp-p, 75
Ω
PR / CR signal — 0.7 Vp-p, 75
Ω
Frequency response:
5 Hz – 60 MHz — 0, –3 dB
Tuner Section [FM] [AM]
(Note:
μ
V at 75
Ω
, 0 dBf = 1 x 10–15 W)
Receiving Range:
87.5 MHz – 108.0 MHz 522 kHz – 1611 kHz
Usable Sensitivity:
1.2
μ
V (12.8 dBf) 18
μ
V
50 dB Quieting Sensitivity: MONO 2.0
μ
V (17.3 dBf)
STEREO 42
μ
V (34.5 dBf)
S/N:
MONO 72 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Total harmonic Distortion (at 1 kHz):
MONO 0.3 %
STEREO 0.7 %
General
Power supply:
AC 230 V, 50/60 Hz
Power consumption:
220 W
0.2 W (Standby)
3 W (CEC standby)
For purposes of improvement, specifications and design are
subject to change without notice.
