31
ENGLISH
Getting Started
Connections
Basic Operations
Advanced Operations
Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
cations
Index
Add new feature
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection
(
v
page 6).
• Perform the add new feature after more than 2 minutes since the
power is turned on.
1
Press
[MENU]
.
Turns on the Menu settings mode and the Menu appears on
the display. (
v
page 22 “Menu map”)
2
Use
ui
to select “Other”-“Add New Feature”,
then press
[ENTER/MEMO]
,
<ENTER>
or
p
.
[Selectable items]
Upgrade
: Execute the upgrade process.
• If the upgrade is not successful, an error message identical to those
in “Firmware Update” will appear on the display. Check the settings
and network environment, then update again.
Upgrade Status
: Display a list of the additional functions provided
by the upgrade.
Upgrade ID
: The ID number shown on this screen is needed
when carrying out the procedure.
See the Marantz website for details about updates.
When the procedure is complete, “Registered” is displayed in this
menu and updates can be carried out. If the procedure has not been
carried out, “Not Registered” is displayed.
[Notes concerning use of “Firmware Update” and “Add
New Feature”]
• Do not turn off the power until updating or upgrating is completed.
• Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating/upgrading procedure to be
completed.
• Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed.
• Furthermore, updating/upgrading the fi rmware may reset the backup
data for the parameters, etc. set for this unit.
• If the update or upgrade fails, remove and re-insert the power cord.
“Update retry” appears on the display and update restarts from
the point at which update failed. If the error continues despite this,
check the network environment.
• Information regarding the “Firmware Update” function and “Add
New Feature” will be announced on the Marantz web site each time
related plans are defi ned.
• When usable new fi rmware is released with “Firmware Update”
or “Add New Feature”, a notifi cation message is displayed on the
menu screen. When you do not want to be notifi ed, set “Update
Notifi cation”
v
page 28) and “Upgrade Notifi cation” (
v
page 29) to
“OFF”.
Setting the network [Network]
1.NA7004N̲ENG̲30A̲0714.indd 31
1.NA7004N̲ENG̲30A̲0714.indd 31
2011/07/14 11:37:23
2011/07/14 11:37:23
