7
ENGLISH
INSTALLATION PROCEDURE
e
Installing the ES7001 onto the wall hanging plate
1.
Insert the cables into the ES7001.
2.
Lift the ES7001 so that the installation screws that you attached to the ES7001 fit into the 4
holes in the installation plate on the wall.
3.
Insert the ES7001 screws into the holes and slide the ES7001 down to lock it against the wall.
• Check that all 4 screws are securely in the holes, and that the unit is fixed firmly in place.
• When lifting the ES7001, make sure that you do not trap any of the cables.
• Make sure you do not scratch or injure your hands or fingers.
Warning:
• If the 4 screws are not correctly inserted into the 4 holes on the plate, the ES7001 may fall
causing injury.
• If the wall hanging plate has been installed upside down, the ES7001 will fall causing injury.
4.
To remove the ES7001 from the wall, lift the ES7001 and pull it forward to remove it.
Caution:
If the unit has been installed for a long period of time, it may be difficult to remove the unit from
the wall hanging plate.
MT7001̲E̲02̲ENG.indd 7
MT7001̲E̲02̲ENG.indd 7
07.9.21 1:03:56 PM
07.9.21 1:03:56 PM
