background image

2

The lightning flash with arrowhead, 

within an equilateral triangle, is 

intended to alert the user to the 

presence of uninsulated “danger-

ous voltage” within the product’s 

enclosure that may be of sufficient 

magnitude to constitute a risk of 

electric shock to persons.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install 

in accordance with the manufacturer’s in-

structions.

8. Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce 

heat.

9. Do not defeat the safety purpose of the polar-

ized or grounding-type plug. A polarized plug 

has two blades with one wider than the other. 

A grounding type plug has two blades and a 

third grounding prong. The wide blade or the 

third prong are provided for your safety. If the 

provided plug does not fit into your outlet, 

consult an electrician for replacement of the 

obsolete outlet.

10. Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 

receptacles, and the point where they exit 

from the apparatus.

The exclamation point within an 

equilateral triangle is intended to 

alert the user to the presence of im-

portant operating and maintenance 

(servicing) instructions in the litera-

ture accompanying the appliance.

WARNING - TO REDUCE RISK OF 

FIRE OR ELECTRICAL SHOCK, DO 

NOT EXPOSE THIS EQUIPMENT TO 

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO 

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or 

back. No user-serviceable parts inside.

IMPORTANT SAFETY 

INSTRUCTIONS!

PLEASE READ THEM BEFORE 

OPERATING THIS EQUIPMENT.

11. Only use attachments/accessories specified 

by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, 

or table specified by the manu-

facturer, or sold with the appa-

ratus. When a cart is used, use 

caution when moving the cart/ap-

paratus combination to avoid 

injury from tip-over.

13. Unplug this apparatus during lightning storms 

or when unused for long periods of time.

14. Refer all servicing to qualified service per-

sonnel. Servicing is required when the ap-

paratus has been damaged in any way, such 

as power-supply cord or plug is damaged, 

liquid has been spilled or objects have fallen 

into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate 

normally, or has been dropped.

15. Do not expose this equipment to dripping or 

splashing and ensure that no objects filled 

with liquids, such as vases, are placed on the 

equipment.

16. To completely disconnect this equipment from 

the a.c. mains, disconnect the power supply 

cord plug from the a.c. receptacle.

17. The mains plug of the power supply cord 

shall remain readily operable.

18. Do not expose batteries to excessive heat 

such as sunshine, fire or the like.

Summary of Contents for LN9101M













Reviews: