Marantz CDR-630 Owner'S Manual Download Page 3

INTRODUCTION

Congratulations on the acquisition of your CDR630 CD Recorder.  
This CD Recorder now enables you to record, play and erase your
own audio Compact Discs. Naturally the recorder can also be used
to play all pre-recorded CDs and combined CDs, such as CD Extra.

You can now create your own high-quality audio recordings on CD.
The discs used to record must bear the logos shown below.

There are two types of recordable AUDIO discs:

1

CD Recordable Audio (record once):
Fully recorded and subsequently finalized audio CD-R
discs can be played on most CD players and recorders. A CD-
R disc can be recognized by the following logo:

or

2

CD ReWritable Audio (multiple recording):

Recorded and finalized audio CD-RW discs can be played on 
most CD players and recorders that are suitable for CD-RW
discs. An increasing number of players and recorders will be
suitable for these discs in the future. A CD-RW disc can be rec-
ognized by the following logo:

or

Once you start using the recorder, you will discover how easy it is
to ‘make’ your own CDs. Nevertheless, we recommend that you
use a ReWritable (CD-RW) digital audio disc on your first attempt,
while following the instructions given here.

Attention! 

Recordings may only be made for professional or per-
sonal use.

It is forbidden to copy material protected by copy-
right, including computer programs, films, television
and audio recordings. This appliance may not be used
for applications of this type.

Read the text carefully and keep the instructions close at hand so
that you can refer to them if necessary.

Unpacking

First check the contents of the packaging. It should contain the fol-
lowing:
–  CD Recorder CDR630
–  Remote control with batteries packaged separately
–  Power cord
–  Audio cables (2 - with red and white plugs)
–  Digital coaxial audio cable (with black plugs)
–  Instructions

If one of these components is missing, please inform your supplier
immediately. Save the packaging material - it may come in handy if
you move the appliance.

AC mains voltage selection 

(for 74CDR630/02M  and CDR630F H only)

Check whether the voltage indicated on the back of the appliance is
the same as the voltage of the mains. Some models of this
recorder have a selector on the back 

(29) 

. Set the selector to the

position indicated for the local AC mains voltage.

Setup

–  Place the recorder on a strong, vibration-free surface.
–  Do not place the recorder near a source of heat or in direct sun-

light.

–  Do not use the recorder under extremely damp conditions.
–  If the recorder is placed in a cabinet, make sure that a 2.5 cm

space remains free on all sides of the recorder for proper venti-
lation.

Attention!

If the appliance is not used or operated in accordance
with the instructions, this may result in exposure to
dangerous radiation or other risks.

Only authorized technicians are allowed to open the
appliance casing or to perform repairs or mainte-
nance.

ReWritable

ReWritable

Recordable

Recordable

5

English

Summary of Contents for CDR-630














Reviews: