17
VARIOUS
OPERATIONS
BASIC
OPERATIONS
BEFORE
OPERATING
ENGLISH
VARIOUS OPERATIONS
This indicates the number
of programmed steps.
The following operations can only be performed
during stop mode
<Programming an entire disc as one step>
(Disc all program)
If you skip step of the operation example, disc 2 is programmed
as step .
<Programming a pause (remote control only)>
(Pause program)
If you press
8
at step , you can program a pause. When you
press
8
, “PA” appears in the display instead of the disc number.
• For example, when making a program for recording both sides
of a cassette tape, press
8
to insert a pause after programming
the tracks for one side. After turning the tape over, press
8
to
resume recording.
Notes!!
• You cannot program a pause as the first step, nor program
two pauses in a row.
• When you program a pause, it counts as 1 step and
reduces the total number of tracks you can program.
•
To erase a program...
Press
7
twice during playback (or once in stop mode). You can
also erase the program by pressing
MODE
,
RANDOM
,
PREVIOUS
, or
SINGLE LOADER PLAY
in either play or stop
mode (or by pressing
BEST
in stop mode).
•
To cancel a program step
In stop mode, each time you press
CLEAR
, the last step in the
program is erased.
• If a programmed disc is missing or inserted backwards
during program play,
“NO DISC”
appears in the display, the
step is automatically erased, and playback proceeds to the
next step.
• Program contents are stored in memory even when the
power is turned off.
• Press the
TIME/CHARA
twice to check the number of steps that
have been programmed.
RENTAL
DISC TRACK REMAIN
MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM
SINGLE CD TEXT PREVIOUS SCAN
PROGRAM
(Memory Back-Up Function)
Memorized data will be stored in memory for approx. 1 month even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount of memory used.
5
4
Notes!!
• If step is carried out before the accumulated time is
displayed, the program play starts and the time is not dis-
played.
• When UNLOAD is pressed while a program has been entered,
the disc for the 1st program step comes on the center position
and the hood opens.
• The display is not shown if the total time of the program is 100
minutes or more.
1
3
