Maquet SERVO-air, User Manual, Page: 106 / 171

Adding medication
Note: Do not use a syringe with a needle
to add medication.
• Open the filler cap plug on the nebulizer
unit.
• Use a pre-filled ampoule or syringe to add
medication into the filler port of the
nebulizer unit.
• Close the filler cap plug.
Note: Medication can also be added in this
manner during nebulization. This does not
interrupt nebulization or ventilation.
Nebulization
Nebulization can be either:
• switched on/off for a certain period of time
• continuous, only Aerogen Solo
Nebulization On/Off
To operate the nebulizer for a specific period
of time (on/off):
1. Tap MANEUVERS/NEBULIZATION.
2. Tap Time if more or less than 10 minutes
is required and adjust the figure up or
down.
1
3
2
If the nebulizer cable is not connected, a
dialog Check nebulizer cable connection is
displayed on the screen. Tap OK to accept.
3. Tap START NEBULIZATION PERIOD. The
default is 10 minutes.
4. Check that nebulization is in progress and
how much time remains by looking at the
progress symbol.
106
SERVO-air Ventilator System v2.2, User's Manual
| 6 | Ventilatory settings and functions |