5
Wireless N300 Cable Router
Connectors
Table 2 shows the function of each connector and switch of the device.
Table 2. Function / Description of Connectors
Connector Description
ON/OFF
SWITCH
Power on/off the device
POWER
Connects to the supplied power cable
LAN 4/3/2/1
Connects the device via Ethernet to up to four PCs on
your LAN
WAN
Connects the device via Ethernet to xDSL / Cable Modem
WLAN
Press this button for at least two full second to turn off/on
wireless signals
WPS
Press this button for at least three full seconds and the
WPS LED will flash to start WPS.
Now go to the wireless adaptor or device and press its
WPS button. Make sure to press the button within 120
seconds (2 minutes) after pressing the router's WPS
button.
If you are using a Wireless adaptor connected to a
computer, a "WPS Authentication" screen will appear.
Wait until the screen says "Authentication succeeded."
This may take a few minutes.
RESET
Reset button. RESET the 802.11n WLAN router to its
default settings.
Press this button for at least 6 full seconds to start to reset
it to its default settings.
