
Technical Specifications:
•
Voltage: 90V-240V 50-60HZ (switching power supply)
•
Power: 20W
•
Light power: High power LED RGB 3W×6pcs
•
Plug: UK mains
•
Control mode: DMX512 control, Voice-activated, automatic control, strobe a variety
of modes
•
DMX Channel: 6CH
Please read through this manual before use.
Important information:
•
Please check the environmental voltage and the technical specifications before
installation to make sure that this product is suitable for the voltage.
•
Select the best angle to install the product. In horizontal or hanging installation,
please use the suitable hanging accessories to ensure the unit is stable and safe.
•
Please use the product in a ventilated and clean environment in which the humidity is
above 40%. Keep it away from any flammable or explosive materials.
•
Do not look directly into the light source in order to avoid visual impairment.
•
After prolonged use, remove the dome and clean the product (avoid rinsing or using
corrosive chemicals to clean the product)
•
This product is not designed for continuous use. Do not exceed the time of use over
8 hours.
User Instructions:
•
On the DMX512 controller, press the menu button and turn to ‘A001’.
•
Then press the ‘ENTER’ button to enter into DMX512 control.
Please refer to the below table.
Channel
Channel
number
Functional Description
CH1
0-5
No strobe effect
6-249
LED Strobe speed from fast to slow
250-
255
No strobe effect
CH2
0
Red LED goes out
1-255
Red LED brightness goes from dim to bright