Maplin A79TY, User Manual, Page: 12 / 18

10
。
B. Setting the scheduling time
a.
In standby or charging status, press twice to start scheduling, LED panel
will show previous scheduled time or “00:00” if there is no schedule settled
before.
b. Press to enter hour-setting mode, the left two numbers on LED panel will
flash. Press to increase hour or to decrease it.
c. Press again to enter the minute-setting mode and the right two numbers
on LED panel will flash. Press to increase minute or to decrease it.
d. Press again to confirm the scheduling.
C.
Cancel the scheduling
a.
Set the scheduling interval to 00:00.
b. Turn off the power switch on the right side of robot, and turn it on again after 3
seconds.
Note:
a.
Before scheduling, please set the robot time to be the same with real time.
b. The robot will start cleaning at the schedule time of Robot Clock every day.
Cleaning Modes
Please touch the button to start cleaning. You can only select the cleaning
mode when the robot is cleaning, press the MODE button on remote control to
select the cleaning mode, the mode type will appear on the robot’s 4 Digit LED
Display as follows:
A.
1111: Spot Cleaning Mode
B.
2222: Auto Cleaning Mode
C.
3333: Edge Cleaning Mode
D.
4444: Zig-Zag Cleaning Mode
1. Spot Cleaning Mode
The robot will activate spot cleaning mode
under the following condition:
a.
When it detects a dirty area.
b.
Press SPOT on remote control or on robot.
2. Auto Cleaning Mode
In this mode, the robot will clean the area automatically
and adjust its cleaning mode according to the
environment.
Note: Press ON/OFF on remote control or on robot.