NOTES:
1. When the unit is first powered, the display will show “24
Hr.” Press the Enter key to select 24 hour format. Press the
AM/PM key to select 12 hour format. (The display will
change to midnight on Sunday with the period flashing.)
2. The unit's memory can be cleared by disconnecting line
voltage and carryover battery.
3. For relay state to change, time must run through the set
point starting time (for example, programming an 8:00 a.m.
start time when it is already 9:00 a.m. will not change relay
state); use override to change state immediately.
4. A zero must precede the hours, minutes, month and dates
which are less than ten (Example-04/01 is April 1st).
5. The day of week is displayed as follows: 1=Sunday,
2=Monday, 3=Tuesday, 4=Wednesday, 5=Thursday,
6=Friday, 7=Saturday, and 8=Holiday.
6. In all programming modes, if a keying error is made, press
CLR then reprogram entire sequence of number keys.
7.
24-Hour Clock Time
12-Hour Clock Time
0:00
12:00 AM (Midnight)
1:00
1:00 AM
2:00
2:00 AM
3:00
3:00 AM
4:00
4:00 AM
5:00
5:00 AM
6:00
6:00 AM
7:00
7:00 AM
8:00
8:00 AM
9:00
9:00 AM
10:00
10:00 AM
11:00
11:00 AM
12:00
12:00 PM (Noon)
13:00
1:00 PM
14:00
2:00 PM
15:00
3:00 PM
16:00
4:00 PM
17:00
5:00 PM
18:00
6:00 PM
19:00
7:00 PM
20:00
8:00 PM
21:00
9:00 PM
22:00
10:00 PM
23:00
11:00 PM
6
