1.
Microphone volume control
Rotate the control knob clockwise to increase the volume of the microphone.
2. Accompaniment volume control
Rotate the control knob clockwise to adjust the volume of the external accompaniment music. When
in use, you can turn clockwise to increase the volume of accompaniment music or counterclockwise
to decrease the volume of accompaniment music.
3. Reverb effect control
Slide the control fader up to increase the reverb effect and vice versa.
4. Monitor volume control
Push the control fader up to increase the monitoring volume. Please slide the fader down to the bottom
before wearing the headset, and then slowly increase the volume to avoid damage to your hearing.
5. Default sound effect
This area presets 8 default sound effect buttons, including: openning, applause, gunshot, laughter,
booing, awkwad, cheering, slapping. The user can press the corresponding button to trigger the sound
effect. Each sound effect button has an indicator light which will be always-on when not triggered;
after pressing the sound effect button, the button light flashes until the sound effect ends. And it restores
to be always-on.
6. Custom sound effect:
This podcast console provides users with 4 custom sound effects buttons. Users can record audio clips
and import them to the podcast console through a microphone, an external audio source, or Bluetooth
device to use these sound effects in live broadcasts.
- 03 -
6.1
Recording: Turn the product on, connect it with either one of microphone, external audio input device, Bluetooth
device. Turn on the "LOOP BACK" mode. Hold any custom key until button light flashes to start recording. Audio
input will be recorded and saved. Release the button to end recording.
Note
: If you do not release your hand during recording, the recording will stop automatically when there is no enough
space, and the light will automatically turn off.
6.2
Clear recording: Hold any of the recorded custom sound effect for 2 seconds to start the clearing process. The
button light will be turned on without flashes. The button light will be turned off when the recording is cleared.
6.3
Play sound effects: Short press any recorded custom button to activate sound effects. It will beep if it is empty
and there is no recording.
