MANUS PRIME X Series, First-Time Setup

Page: 6 / 36

Each finger contains three layers of material connected to the electronics.
The top layer contains the IMU sensors which register position and orientation on a 9 degrees of freedom
(DOF) grid.
The second layer acts as a a support layer to keep all of the sensors aligned.
The third layer consists of flexible bend sensors which register the amount of bending the first two digits of
each finger does.
Move both hands in a single repetitive motion, like a swimming motion or in a figure 8. Do this for a couple
of seconds.
Finish by holding both hands still. Putting them on a table can help.