background image

6

WARNING          DANGER

READ AND UNDERSTAND THE RULES FOR SAFE

OPERATION AND ALL INSTRUCTIONS IN THIS

MANUAL BEFORE OPERATING THIS PRODUCT.

BE FAMILIAR WITH THE CONTROLS AND THE

PROPER USE OF EQUIPMENT. IMPROPER USE OR

CARE OF THIS LOG SPLITTER, OR FAILURE TO

WEAR PROPER PROTECTION, CAN RESULT IN

SERIOUS INJURY. WEAR EYE PROTECTION,

GLOVES, AND PROPER CLOTHING.

WARNING!

WARNING!

WEAR EYE PROTECTION

READ AND

UNDERSTAND

OPERATOR’S MANUAL

BEFORE USING!

KEEP BYSTANDERS

AND PETS AT A SAFE

DISTANCE

3

WARNING! 

WEAR SLIP-RESISTANT

FOOTWEAR. MAINTAIN

FOOTING AND BALANCE

AT ALL TIMES. DO NOT

STAND ON SLIPPERY,

UNEVEN OR UNSTABLE

SURFACES. DO NOT

WORK IN ODD

POSITIONS.

WARNING! 

WEAR SHOES THAT

PROVIDE PROTECTION
AGAINST THE RISK OF

LOGS ACCIDENTALLY

FALLING ON FEET.

!DANGER! 

KEEP BOTH HANDS ON

THE SWITCHES AND

AWAY FROM MOVING

PARTS. NEVER REACH

INTO THE CRUSHING

DANGER AREA AS LONG

AS PARTS MAY MOVE.

WARNING!

NEVER REMOVE LOG

JAMMED ON THE

SPLITTING WEDGE 

WITH YOUR HANDS!  

WARNING! 

ALWAYS WEAR WORK

GLOVES TO PROTECT

YOUR HANDS FROM

WOOD CHIPS AND

SPLINTERS

WARNING! 

DO NOT EXPOSE TO RAIN

OR WET CONDITIONS

WARNING! 

REMOVE PLUG FROM

MAIN ELECTRIC POWER

SOURCE IMMEDIATELY

IF CABLE IS DAMAGED

OR CUT, BEFORE

SERVICING OR WHEN

NOT IN USE

WARNING! 

CORRECT LINE 

VOLTAGE FOR YOUR 

LOG SPLITTER

WARNING! 

ALWAYS PAY 

ATTENTION TO THE

MOVEMENT OF THE

PRESSURE PLATE

WARNING

DO NOT OPERATE THE SWIFTSPLIT IF THE UNIT IS DAMAGED IN ANYWAY.

Summary of Contents for SwiftSplit 5000






















Reviews: